Progress on the Iron Maiden

The work day was a busy one but after dinner it was time to head down to the basement for some more time in the workshop.  Tonight however was not going to be continued work on the Bondage Post System, but rather tonight's focus was on the Iron Maiden.  After checking out the healing status of Mistress Christine's cock it was apparent that Her cock should be back to a healthy state in just one or two more days.  That meant that it was time to re-focus on fixing the root of all of the abrasion issues with the Iron Maiden.  In case You have not been following along, It became clear that there was a serious flaw with the Iron Maiden.  This flaw was causing serious abrasions to the underside of Mistress Christine's cock.  Originally it was thought that the problem was caused by sharp edges of the first ring of the Iron Maiden's spiked prision or as i like to call it, her cunt.  At that time i thought it was actually doing long term damage to Mistress Christine's ball sack, but that turned out not to be the case.  In actuallity, the damage was being done to Mistress Christine's cock about 5/8's of an inch from the root which put it right at the first stainless steel spike on the very lowest part of the Spiked Cage.  Mistress Christine's and i discussed what would be an acceptable modification to the Iron Maiden's design.  i suggested to Mistress Christine that the one steel spike that was causing this long term abrasion be filed and sanded down to a slight nub which would still make it's prescence felt, but not cause any permanent damage.  So this evening was all about converting the steel spike into a steel nub.  This turned out to be a fairly tedious task, because Mistress Christine's instructed me not to affect any other aspect of the Iron Maiden's cunt that will all to soon imprison Mistress Christine's cock and balls.  Part of what made this a tedious task was the fact that all the other 39 steel spikes were located very close to steel spike to be modified so there was not a lot of space to file the problem spike down without touching a single other point.  Eventually i found a rythm and stroke length that seemed to be pretty effective and within 30 to 45 minutes the former stainless steel spike was seriously taking the shape of a nub.  Finally it was time to start sanding all of the surfaces smooth so that there should be no sharp edges on the nub.  This has now been completed and i have attached several photos below.  The first picture shows one of the steel spikes at close range so that you can see what was cutting into and abraiding the underside of Mistress Christine's cock.  The other pictures show, from a couple of different angles, the resulting nub that now remains.

Hopefully all of the healing of Mistress Christine's cock and balls will have completed by Wednesday and it will once again be safe to lock Mistress Christine's cock and balls into the Iron Maiden's cunt for further long term testing and analysis.  Once Mistress Christine's cock and balls are locked up it will be interesting to learn if this final modification has accomplished it's goal such that Mistress Christine's cock and balls can be locked up indefinitely as i serve Mistress Christine.